Page 18 - B8773-AEW-XX-XX-PP-A-0001_[P8]_Contractors Manual

Letter faces will be white sprayed aluminium. 1.5.6 Projecting Signs

The face of the tile logo will be aluminium The preference for the projecting sign is an
and sprayed red/blue/white to match the internally illuminated version.
specification of the internally illuminated tile For all versions of the projecting sign, the
logo. The white 5mm border all round is retained. graphics must be identical on both sides i.e the
domino tile to slope upwards from bottom left to
The tile logo and letterset are to be back lit, top right, (Single dot at the top) on both sides.
evenly illuminated by LED modules fixed back THEY ARE NOT MIRROR IMAGES.
to the inside face individual letters / logo to
manufacturers details, with all wiring and drivers Internally Illuminated Aluminium Projecting Sign
unseen.

Projecting sign having panel sizes as drawing.

Case constructed from 125mm wide extruded
aluminium having at least one edge removable.

Carcass and wall back plate with 2no. 37.5mm
Tel: 0151 649 8444 www.signs2go.net
circular aluminium space bars, all powder
coated RAL 7043 Traffic Grey.

Sign to stand off from the wall to the edge of
the projector by 125mm.

An internal centre panel of 5mm Foamex is to
Tel: 0151 649 8444 www.signs2go.net
be fitted to take two sets of LED modules, for
even illumination both sides.

Face panels to be from 3mm opal acrylic with
applied Avery Dark Grey 759 vinyl, stencil-cut
to show the tile logo in translucent red Mactac
9758-06 and translucent blue Mactac 9738-
05 on translucent white leaving a 5mm white
border all round.

1.5.5 Halo Illumination Fascia Signs 30 May 2018
1.5.6 Projecting Signs 30 May 2018

Tel: 0151 649 8444 www.signs2go.net