Page 15 - B8773-AEW-XX-XX-PP-A-0001_[P8]_Contractors Manual

The Principal Contractor must arrange for
suitable power supplies and time controls to all
signage ensuring all cables are concealed from
view. The principal contractor must also ensure
that the signage substrate is suitably dressed
and watertight, with a weatherproof flashing
to be installed to cover the junction between
sign and building (silicon mastic seal is not
acceptable).

1.5.2 Setting Out Guidelines

In order to create the right proportions between
the lettering and logos on different heights of
fascias, the following guidelines should be
adopted. In some cases the dimensions below
may not be appropriate and the approved
signage drawings should be referenced for
confirmation.

General Setting Out
Distance between logo and lettering 50mm
Distance between bottom of logo and 50mm 1.5.3 Internally Illuminated Fascia Signs
lettering to strap line
Strapline to be positioned at the bottom Internally illuminated, built-up individual letters
of the fascia board in most instances and logo are always the preferred option for
fascia signage. These will be mounted on a
Lettering and logo setting out 2mm aluminium back panel formed on four

Height of fascia Distance Distance sides with 25mm folded returns complete with
between top between top 20mm x 20mm internal aluminium fixing angle to
of fascia to of fascia to the top and bottom or 20mm up and downstands
highest point top of the ‘’i’’ in depending on circumstances. Panel is to be
of tile logo Dominos. etch primed and powder coated semi-gloss
Band A – 500mm 50mm 100mm grey to match RAL 7043 Traffic Grey.
to 800mm
Band B – 800mm 100mm 200mm
to 1000mm
Band C – 1000 to 150mm 300mm
1200mm
For all signage installations please refer to project
drawings for specific details.

1.5.1 Fascia Signage General Principles 3 September 2018
1.5.2 Setting Out Guidelines 30 May 2018
1.5.3 Internally Illuminated Fascia Signs 30 May 2018