Page 17 - B8773-AEW-XX-XX-PP-A-0001_[P8]_Contractors Manual

Timber Fascia Construction - Externally Aluminium Fascia Construction - Externally
Illuminated Illuminated
Fascia description generally as for unlit timber Fascia construction as for unlit aluminium fascia
fascia but the letterset and logo are to be but the letterset and logo/full length to be
illuminated over their full length by 1no. 80mm illuminated by 1no. 80mm diameter extruded
diameter extruded aluminium trough light aluminium trough light, illuminated by LED
illuminated by LED power modules. power modules.’

Trough light modules to be guaranteed for a Trough light modules to be guaranteed for a
minimum of 5 years. minimum of 5 years.

1.5.5 Halo Illumination Fascia Signs

Built-up individual letters and tile logo will be
mounted on an aluminium back panel to same
construction as for internally illuminated signs
(refer to section 1.5.3) via concealed stud fixings.
To the face of the fascia panel the built up tile
logo and letterset must be applied with 40mm
returns all round, constructed from aluminium,
white powder coated to RAL 9010, with 10mm
clear acrylic letter backs.

Aluminium Fascia Construction - No Illumination
2mm aluminium back panel formed on four
sides with 25mm folded returns complete with
20mm x 20mm internal aluminium fixing angle to
top and bottom or 20mm up and downstands
depending on circumstances. Panel etch
primed and powder coated semi-gloss grey to
match RAL 7043 Traffic Grey.

1.5.4 Non-internally Illuminated Fascia Signs 3 September 2018
1.5.5 Halo Illumination Fascia Signs 30 May 2018