Page 16 - B8773-AEW-XX-XX-PP-A-0001_[P8]_Contractors Manual
P. 16
1.5.4 Non-internally Illuminated Fascia Signs
Where a planning consent requires an
alternative method of signage illumination other
than internally illuminated individual letters, then
one of the following specifications should be
used, as appropriate to the particular consent
requirements:
Non-Internally Illuminated Tile logo and letterset
To the face of the fascia panel the built-up tile
logo, letterset and strap line must be applied
with 30mm returns all round including the strap
To the face of the fascia panel the built-up tile line. Constructed from aluminium, white powder
logo, letterset and strap line must be applied coated to RAL 9010, both inside and out, with
with 65mm returns all round (except the strap 5mm 069 translucent white acrylic faces. Letter
line which has 30mm returns) constructed from backs to be white aluminium.
aluminium, white powder coated to RAL 9010,
inside and out, with 5mm 069 translucent white Additionally, apply a white strap line 50mm wide
acrylic faces. Letter backs to be white sprayed with 30mm returns, otherwise constructed as the
aluminium. tile logo and letterset.
The face of the tile logo to be decorated with
5-7 year vinyls to dense blue Mactac 9839-24
and dense red Multi Fix 7911.
The vinyl is to be stencil cut to show white dice
dots through. White 5mm border all round to
equal the gap between the red and blue vinyls.
Timber Fascia Construction - no illumination
The face of the tile logo is to be decorated with 18mm exterior grade birch faced plywood
5-7 year vinyls to translucent blue Mactac 9738- back panel complete with 20mm angled
05 and translucent red Mactac 9758-06. Vinyl timber frame all round, sealed, undercoated
is to be stencil cut to show the white dice dots and painted with two top coats semi-gloss grey
through. White 5mm border all round, equal to to match RAL 7043 Traffic Grey.
the gap between the red and blue vinyls. Install, with no visible fixings, to a sealed and
weathered background. A weatherproof
The tile logo and letterset are to be evenly flashing is to be installed to cover the junction
illuminated by LED modules with all wiring and between sign and building (silicon mastic seal is
drivers unseen. The strap line remains unlit in all not acceptable).
cases.
1.5.3 Internally Illuminated Fascia Signs 30 May 2018
1.5.4 Non-internally Illuminated Fascia Signs 3 September 2018
