Page 68 - B8773-AEW-XX-XX-PP-A-0001_[P8]_Contractors Manual

4.2 Lighting

4.2.1 Front of House Lighting
Customer areas and kitchen lighting is usually
a mix of spotlights, wall wash, ambient lighting
and feature pendants provided by Domino’s
approved supplier Fagerhult. General light
fittings will be supplied sprayed to RAL 7039 –
NOTE: This NOT the same colour as the ceiling
(RAL 7037).

General principles for positioning each fitting
are as follows:

• Wall wash lights to be fitted at 1200mm
centres (alternate tiles) for the full extent of
all graphic / feature walls (except the timber
wall which will have down lights angled
towards the wall) and white tiled walls. Each
light to be installed between 400-600mm off
the wall face.
• Spot lights to be installed in specific locations
only, as accent lights: Typically customer
facing, the length of slap table (in line with
the counter), 2No over cut table.
• Downlights are to be used throughout the
rest of the Bake & Serve and Customer Area
ceiling to provide adequate task lighting,
generally one fitting per 6 ceiling tiles.
• Feature pendant lights are to be located
over communal tables in the customer area,
in accordance with the project drawings.
• All pendants to be to be hung 1950mm
AFFL to underside and centred to the sit up
bar / table. The pendants have a standard
cable length - between 600-850mm. If the
customer area ceiling is higher than 2500mm
AFFL longer cables need to be fitted.

4.2.1 Front of House Lighting 30 May 2018