Page 71 - manual_V5_11_9_2018_Html5
P. 71
Figure 5-13: Example Cross-section Diagram. Default options/settings are shown.
Users can change the vertical exaggeration factor of the cross-section by unchecking the radio box next to
‘Automatically’, and then single-clicking in the text-box next to ‘Vertical Exaggeration Factor’ to enter a
different value. The plot can be enlarged by checking the radio box next to ‘Big Plot’ (see Figure 5-14
After making all desired changed, click on the ‘ReDraw’ button to update the plot.
Figure 5-14: Customized Cross-section Diagram. The hydraulic conductivity (K) field is shown, with red colors
indicating high K and bluer colors indicating low K.
5.5 3D Visualizations
MAGNET allows the model parameters and simulation results to be viewed as a three-dimensional (3D)
surface. An example of the chart interface is shown below in Figure 5-15.
71
