Page 660 - Med Plaza and Cancer Center

PROPRIETARY AND CONFIDENTIAL DRAFT 28/Feb/03

Configuring the Master Alarm by Using the Front Panel
1
Chapter 1: Introduction

Configuring the Master Alarm by Using the Front Panel

Tools required: 5/32" hex wrench

Entering the Master Alarm’s Configuration Mode

The Master Alarm can be configured by using the front panel; however,
configuring by using the Web pages is faster and easier (see “Configuring and
Browsing the Master Alarm by Using the Web Pages” on page 1-72).

NOTE:
If the Web pages are used, Master Alarm configurations can be transferred
from one to another.

1. To enter the configuration mode, do the following:
a. Using a 5/32" hex wrench, unlock the front panel (DM) (see figure 1-
21 on page 1-63).

b. Open the front panel (DM).
c. Locate the Master Alarm Module (DN).

Figure 1-21. Master Alarm

MedPlus TotalAlert™ Alarm Network Operation and Maintenance Manual (man291ra) Page 1 - 63