Page 444 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog

Oil Pan Gaskets Dry Sump Oil Tanks
Race quality gaskets are of premium Engineered for drag racing, fabricated aluminum,
quality and steel reinforced, eliminat- 7" diameter dry sump tanks are available with or
ing the possibility of leakage. without integral breather tanks. Tanks are fitted with
Part No. Description large diameter, screw-on billet aluminum caps with
MOR93150 SB Chevy, Pre-1985 With 2-Pc. Rear Main Seal O-rings for easy service. Five and six quart capacities.
MOR93153 BB Chevy, Mark IV, Notched For Stroker Cranks Part No. Description
MOR93174 BB Chrysler 383-440, Hemi/Wedge/KB/BAE, Exc. TFX 5 Qt. Dry Sump Oil Tank, 12.86" Tall, (3) -12AN Fittings, (1) -12AN
MOR22683
Breather Fitting, Use With MOR85465 or MOR85466 Breather Tank
Oil Pan Stud Kits MOR22687 6 Qt. Dry Sump Oil Tank With Integral Breather Tank, 14.86" Tall, (1)
Stud kits ease oil pan installation -16AN Fitting
and help insure a leak-free seal. MOR22689 6 Qt. Dry Sump Oil Tank With Integral Breather Tank, 14.86" Tall, (3)
-12AN Fittings
Each kit includes grade 8 heat MOR22677 Straight Extended Tank Mount, 5.25" From Flange To Saddle Base
treated studs and lock nuts with
attached washers and serrated faces for positive retention. In-Line Screened Oil Filter
Part No. Description MOR23860
MOR38350 Oil Pan Stud Kit, SB Chevy/Olds, 18 Pcs. Lightweight aluminum oil filter
MOR38360 Oil Pan Stud Kit, BB Chevy/Pontiac, 20 Pcs.
MOR38361 Oil Pan Stud Kit, BB Chevy Race Pans, 18 Pcs. installs in oil system scavenge
lines, preventing debris from entering dry sump pump and oiling
Oil Pan Dipstick Kits system components. Filter, which includes -12AN male fittings,
features a cleanable, 304 stainless steel screen.

Dipstick kits fit Moroso oil pans with 1/4" NPT dipstick bungs Filter Fitting
and are offered in traditional chrome plated or stainless steel flex Fitting includes a stainless steel screen to
tube versions. Existing “full” and “fill" marks may be used as-is trap metal particles before they reach the
or new marks added. pump or engine. Ideal for dry sump tanks, etc. Sold individually.
Part No. Description Part No. Description
MOR25970 Chrome Plated Steel Dipstick Kit, 24" Overall Length MOR23960 Filter Fitting, 3/4" NPT To -12AN
MOR25971 Stainless Steel Flex Tube Dipstick Kit, 20-3/4" Overall Length MOR23961 Filter Fitting, -12AN To -12AN
MOR23962 Filter Fitting, -16AN To -16AN
T3 Series Dry Sump Oil Pumps
The best performing dry sump pumps ever Dry Sump Breather Tanks
produced by Moroso, T3 Series pumps utilize Well suited for use as a remote breather/oil separa-
tri-lobe scavenge sections with individual tor for dry sump oil tanks, aluminum tanks are 3-1/8"
timing gears for proper clearance at high diameter x 6-1/2" tall (less breather). Tanks include
RPM's. Aluminum bodied pumps weigh non-hooded breather and mounting bracket.
close to 50% less than traditional gerotor pumps and take up to Part No. Description
40% less horsepower to drive. Offered in Single-, 3-, 4-, 5- and MOR85470 Breather Tank, 3/8" NPT Inlet
6-stage versions for dragsters or door car applications. Sold MOR85473 Breather Tank, (2) 3/8" NPT Bungs, 180° Apart
complete with necessary fittings and mounting brackets.
Door Car Dragster 2.5 Qt. Dry Sump Breather Tank
Description Part No. Part No. MOR85466
Single-Stage Oil Pump MOR22341 MOR22441
3-Stage Oil Pump MOR22343 — Large, 2.5 qt. capacity tank eliminates the need for two
4-Stage Oil Pump MOR22344 — tanks, while dual -12AN fittings allow hooking up dry
5-Stage Oil Pump MOR22345 — sump pump and vacuum tank. Lightweight aluminum
tank is 3" diameter x 17-1/2" tall, includes drain cock,
Dry Sump Pulleys non-hooded breather and mounting bracket.
And Accessories
Gilmer style pulleys are machined Vacuum Pump Breather Tank
from billet aluminum that is hard coat MOR23532 MOR23560 MOR85465
anodized for added durability. Pulleys Lightweight aluminum tank is for use with
have a 3/8" pitch and fit 5/8" diameter shafts. Moroso racing vacuum pumps and includes
a -12AN fitting to ease plumbing. Tank has
Part No. Description
MOR23528 Dry Sump Pump Pulley, 28-Teeth a 3-1/8" dia. and 11-1/2" overall height and
MOR23532 Dry Sump Pump Pulley, 32-Teeth includes a clamp-on filtered breather.
MOR23560 Belt Guide, .062" Thick, 2.50" OD x 1.00" ID
MOR23561 Belt Guide, .062" Thick, 3.00" OD.x 1.00" ID Breather Tank MOR85467
MOR97110 Gilmer Drive Belt, 60-Teeth, 22.5" L x 1" W Tank is popularly used on applications using dry
MOR97120 Gilmer Drive Belt, 64-Teeth, 24" L x 1" W sump pumps, vacuum pumps or engines that have
“pushed oil” with other breather tanks. Spun alu-
MOR97130 Gilmer Drive Belt, 68-Teeth, 25.5" L x 1" W minum tank is 10-1/4" tall x 3-1/8" diameter and
MOR97140 Gilmer Drive Belt, 72-Teeth, 27" L x 1" W includes -12AN male side fitting and a -8AN drain
MOR97170 Crankshaft Pulley, 1" Wide, 16-Teeth plug. Sold complete with billet aluminum panel
MOR97171 Crankshaft Pulley, 1" Wide, 17-Teeth mount clamp.

442