Page 446 - 2018 Racecar Engineering Drag Racing Parts and Accessories Catalog

Racing Oil Filters Oil Filter Adapters
Filters are rated at 27 microns and provide less Adapters lower filter approximately 1/2" and
pressure drop, more flow, less oil by-pass, and maxi- accept plumbing for accumulators, external or
mum oil filtration. dry sump pumps, or remote oil filters. Includes
Part No. Description hardware and O-rings.
MOR22459 Chevy Short Style Oil Filter, 4-9/32" Tall Part No. Description
MOR22460 Chevy Tall Style Oil Filter, 5-1/4" Tall MOR23690 Chevy V8, For Accumulators And External Or Dry Sump Pumps
MOR22461 Chevy Extra Tall Oil Filter, 8" Tall MOR23692 Chevy V8, For Remote Oil Coolers
MOR22462 Chevy Gen. III, 1997-06 GM LS, 13/16"-16 UNF Thread, 3-1/2" Tall
MOR22463 Ford 4.6L/GM LS, 2007-Up, 22mm-1.5 Thread, 3-1/2" Tall
MOR22465 Remote Oil Filter, 1-1/2"-12 UNF Threads, Replaces Fram HP6, 6-1/4" Tall Billet Oil Filter Bypass Plate
MOR22470 Ford/Chrysler Tall Style Oil Filter, 5-1/4" Tall MOR23782
“Engine Saver” Pre-Filter Screen Necessary when using a remote oil filter
or returning oil from dry sump systems. Fits
MOR23845 small and big block Chevys and Merlin big
Stainless steel screen fits at the top of spin-on oil blocks. Plate accepts 1/2" NPT fittings. Mounting hard ware and
filters to trap debris before it enters the filter ele- O-rings are included.
ment. Serves as an “early warning signal” during
filter inspection. Fits all small and big block Chevy engines with
spin-on oil filters. Oil Bypass Eliminator
MOR23775
External Heating Pads MOR23996
Pads adhere to dry sump oil tanks or oil Machined, billet aluminum adapter eliminates
pans to pre heat oil. Etched foil dis trib utes the bypass found in OEM filter adapters, pre-
venting unfiltered oil from entering the engine.
heat evenly and silicone outer shell resists oil Adapter features a single inlet and accepts
and dirt. Includes 8", 18 AWG elec tri cal cord spin-on, stock type oil filters. Fits all Chevy V8 engines.
with plug for 110 volt AC outlets.
Part No. Description
MOR23995 6" x 12" Pad, 360 Watts, Hook And Spring Attachment Oil Filter Bypass MOR23770
MOR23996 5" x 7" Pad, 400 Watts, Heats Oil From 66°F To 160°F In 25 Min. Fits all small block Chevy V8’s. For use
MOR23997 2" x 15" Pad, 150 Watts, Perfect For Narrow Areas
with wet sump oil systems when
Oil Preheaters re mote oil filters or coolers are
Element type preheaters increase temper- used. Bypass is cast from aluminum
ature of 12 qts. of oil by 60°F. in 30 minutes with 1/2" NPT inlet and outlet. Includes
gaskets and fasteners.
for improved performance. May be installed
in engine or transmission pans, dry sump
tanks, etc. Element is 4-1/2" long and includes 1" NPT fitting and Oil Filter Block-Off Plate
7' long 110V power cord. MOR23840
Part No. Description Often used on dry sump oil system
MOR23980 Internal Oil Preheater, Aluminum Fitting
MOR23990 Internal Oil Preheater, Steel Fitting installations, plate has a 1/2" NPT port for input pressure line and
MOR23991 Internal Oil Preheater, Aluminum Fitting, Self-Contained fits all small and big block Chevy (except Gen. V/VI or those with
bolt hole at center of pad).
Lifter Valley Oil Baffles
Baffles keep hot oil off of the bottom Oil Pump Block-Off Plate
of intake manifold for increased horse-
power and keep lifters in their bores if push- MOR23790
rod or rocker arms fail. Minor trimming required for Bolt-on aluminum plate seals oil pas-
installation. Not compatible with roller lifters. sage on rear main cap when dry sump
is used. Requires no drilling or tapping for
Part No. Description
MOR25050 SB Chevy, Including 18° Cylinder Heads in stal la tion on small, big block and 90° V6 Chevys.
MOR25100 BB Chevy
Accumulator Remote Oil Filter Mounts
Oil is stored under pressure for Ideal for dry sump oil systems on installa-
immediate release into the main tions requiring a remote mounted oil filter.
galleries if oil pressure drops. It can also decrease the oil level in Offered in cast or billet aluminum construc-
the pan to reduce windage. A cold start valve releases oil into a tion, mounts accept popular spin-on type
cold engine to reduce wear. The Accumulator is 20-1/8" long and oil filters. Billet mounts include adapters to
4-1/4" diameter, mounts in any position, holds 3 quart of oil and accept most popular filters.
is tapped for a 1/2" NPT fitting. Use with mount kit MOR23920, Part No. Description
oil filter adapter MOR23690 (Chevrolet), and solenoid valve MOR23700 Cast Filter Mount, Accepts Ford/Chrysler Filter, Right Inlet/Left Outlet
MOR23905. MOR23710 Cast Filter Mount, Accepts Ford/Chrysler Filter, Left Inlet/Right Outlet
MOR23750 Cast Filter Mount, Accepts Chevy Filter, Right Inlet/Left Outlet
Part No. Description
MOR23900 Accumulator, 3 Quart Capacity MOR23760 Cast Filter Mount, Accepts Chevy Filter, Left Inlet/Right Outlet
MOR23920 Accumulator Mount Kit MOR23763 Billet Filter Mount, Accepts Most Filters, Side Port Style
MOR23690 Oil Filter Adapter MOR23764 Billet Filter Mount, Accepts Most Filters, Front Port Style
MOR23905 12 Volt Solenoid Valve MOR23766 Large Billet Filter Mount, Accepts Most Filters, Vertical Ports
444