Page 189 - 2018 Allstar Performance Parts and Equipment Catalog

Upper Coil-Over Shock Mount Kit Quick Release
ALL60230 T-Handle Pins SUSPENSION
Weld-in kit provides a Positive lock quick release pins
mounting point for rear hold tightly in place until the Lengths stated are from
coil-over shock mounts handle button is depressed base of T-handle to top
of detent ball.
in tube, boxed or stock allowing the pin to be inserted
frames with up to 48" or removed into or out of a hole with ease. Handles are
between frame rails. Great NEW! made from 380 die cast aluminum, shanks are made from
for drag racing and street 4130 steel. Each pin is equipped with a stainless steel split
applications, kit includes a 48" long, .120" wall x 1-1/2" ring allowing the option to attach a cable assembly.
mild steel tube, reinforced mounting tabs, 2" x 3" end ALL60300 ..... 1/4" x 1" ALL60314 ..... 3/8" x 3"
plates and 1/2" hardware. ALL60301 ..... 1/4" x 1-1/2" ALL60318 ..... 1/2" x 2"
ALL60302 ..... 1/4" x 2" ALL60320 ..... 1/2" x 2-1/2"
Clamp-On ALL60304 ..... 5/16" x 1" ALL60322..... 1/2" x 3"
Shock Brackets ALL60306 ..... 5/16" x 2" ALL60324 ..... 1/2" x 3-1/2"
ALL60326 ..... 5/8" x 2"
ALL60308 ..... 5/16" x 3"
Clamp-on shock brackets ALL60310 ..... 3/8" x 1" ALL60328 ..... 5/8" x 2-1/2"
mount standard and coil- ALL60312 ..... 3/8" x 2" ALL60330 .... 5/8" x 3"
over shocks with 1/2" I.D.
inner bushings to round tubing without Quick Pin Lock Collar
welding. Easily add additional mount or Steel lock collar provides a positive lock for quick
pivot mount when experimenting or trying different set- release pins. Black coated collar with button
ups. Standard brackets position the shock approximately head machine screw allows attachment ALL60335
1" below the chassis tubing. Drop mount brackets position of a securing device, like an Allstar lanyard
the shock approximately 2-1/2" below the chassis tubing. (ALL18461 or ALL18463).
Brackets include mounting hardware with nyloc locking nuts.
ALL60335 ..... 1/2" Collar With 10-32 Screw
Clamp-On Drop Mount Clamp-On ALL60336 ..... 5/8" Collar With 1/4"-28 Screw
ALL60220 ..... 1-3/4" ALL60224 ............ 1-3/4"
ALL60221 ..... 1-1/2" ALL60225 ............ 1-1/2" Coil-Over Load Bolt Assembly
ALL60222 ..... 1-1/4"
ALL56074
1/2" Rod End Mount ALL60073 Threaded aluminum bolt is 6" long with 1-1/8"-12
3/16" thick steel mount with 1/2" holes accepts fine threads and is commonly used on big bar soft
rod ends up to 5/8" wide. Mount is 1-5/8" tall spring cars. Load bolt offers the ability to easily
overall. change corner weights, change the center to center
distance of the shock, adjust bump stop distances
without adding shims and adjust ride height
Steel Shock Quick Pins without running out of shock travel. Commonly
Steel shock quick pins allow coil-over shocks ALL60108 used with ALL56098 threaded sleeve.
to be quickly serviced or changed. ALL60108 ALL56075 ..... Replacement Shock End
will work with Allstar coil-over brackets elimi-
nating the need for a separate bushing. ALL60109 Suspension Limiter
is commonly used on non-bushing type
brackets, but can be used with Allstar ALL60109 Single bushing suspension limiter is com-
brackets along with bushing. Shock quick pins monly used on the chassis LR or RR to limit
are 2-1/2" long and include a hairpin. travel during acceleration “hike up” and
control roll steer. Double bushing limiter
ALL60108 ..... Shock Quick Pin With Shoulder is often used on the lift bar to control
ALL60109 ..... Shock Quick Pin Without Shoulder lift bar travel on deceleration. Bushing design
ALL18442 ..... 1-5/8" Replacement Hairpins, 2-Pack
reduces or absorbs shock when suspension is
Titanium Shock Quick Pins ALL17120 limited and helps reduce tire unloading. Top
plate is drilled to attach a 1/2" rod end when used in a
Titanium shock quick pins allow coil-over shock mount or for attaching to a weight jack bolt with
shocks to be quickly serviced or changed. 7/16"-20 internal threads using optional chrome moly stud
ALL17120 has a long shoulder and will work ALL64304. Clevis has a 3/8" hole for simple attachment
with Allstar coil-over brackets eliminating ALL17121 to a chain or cables.
the need for a separate bushing. ALL17121 is ALL64300 ..... Single Bushing Limiter
commonly used on non-bushing type brackets, ALL64302 ..... Dual Bushing Limiter
but can be used with Allstar brackets along with bushing. ALL64304 ..... Chrome Moly Stud With Jam Nut
Shock quick pins are 2-1/2" long and include a hairpin.
ALL17120 ...... Quick Pin With Shoulder
ALL17121 ...... Quick Pin Without Shoulder
www.allstarperformance.com 187