Page 191 - 2018 Allstar Performance Parts and Equipment Catalog

Weld-On Panhard Bar Bracket Clamp-On
ALL60168 Panhard Bar Brackets SUSPENSION
Bracket is made from 1/4" steel and has six 3/4" Adjustable steel or aluminum brackets
mount holes for Panhard bar. Measures 8-1/2" tall clamp to square tubing, providing mul-
by 2" wide. tiple Panhard bar mounting locations. Brackets
are tapped for 3/4"-10 bolts. Steel ALL60240
brackets have outer holes 5" apart.
Track Bar Locator Brackets Aluminum brackets have outer holes
Track bar locator brackets are an ideal 5.5" apart. Hole measurements are
bolt-on mounting point for rod ends NEW! center-to-center.
commonly found on Panhard bars, track bars Steel Brackets
or rear axle housing track locators. For use ALL60240 ..... For 2" x 2" Tubing ALL60245
with 1/2" diameter rod ends. Available with a 5/8" or ALL60244 ..... For 1-1/2" x 1-1/2" Tubing
3/4"bracket mounting hole. Aluminum Brackets
ALL60079 ..... 5/8" Hole, 1" Gap ALL60243 ..... Straight, 2.5 Lbs., For 2" x 2" Tubing
ALL60089..... 3/4" Hole, 1-3/16" Gap ALL60245 ..... Angled, 2.0 Lbs., For 2" x 2" Tubing
Remote Adjustable
Steel Radiused Climbing Style Panhard Bar Mounts
Frame Mount Panhard Bar Brackets Easily adjusted on frame
Steel climbing style side of Panhard bar, mount
adjuster mounts to has a threaded shaft and
chassis square tubing fastens to 1-3/4" diameter
and permits Panhard/ tubing. Standard mount kit
J-bar adjustment has 2" of adjustment, drop
without removing or mount kit has 5" of adjust-
realigning spacers or ment. Each turn of the shaft
tabs found on other ALL60237 moves mount .100". Extension rod may be
mounts. Radiused ALL60239 mounted in rear window or decking for
slot eliminates the need to re-square the rear end after quick, easy adjustments from outside of the
adjustments. car. Mounting hardware and a 3/4" Panhard
ALL60236 ..... For 1-1/2" Tubing, Center Mounting bar bolt are included.
ALL60238 ..... For 1-1/2" Tubing, Inside and Outside Mounting ALL60270 ..... Standard Mount Kit
ALL60237 ..... For 2" Tubing, Center Mounting ALL60273 ..... Drop Mount Kit
ALL60239 ..... For 2" Tubing, Inside and Outside Mounting Replacement Items:
ALL60272 .... Extension Rod With Bushing ALL60270 ALL60273
For ALL60270/ALL60273
Aluminum Radiused ALL60274 ..... Flange Bearing
Climbing Style Frame Mount Internal Screw Style
Panhard Bar Brackets
Easily adjust your Panhard bar with only Panhard Bar Adjusters ALL56152
one wrench! Climbing style adjuster A screw bolt style adjuster is welded
allows any amount of adjustment inside of the tube. When welded in
without having to remove or place of current mount, Panhard bar
realign any spacer/tabs. Radiused can be easily adjusted by turning the
slot so you don’t have to re-square the screw bolt. Attach Panhard bar to this
rear end after adjustments. Aluminum adjuster with ALL60183 Clevis (not included). Rear
brackets fit 2" x 2" tubing. Panhard mount, 21" tall with 3" of Adjustment.
ALL60247
ALL60246 ..... Inside/Outside Mounting
(Most modifieds and GRT) Aluminum Panhard Bar Clevis
ALL60247 ..... Center/Inside Mounting (Mastersbilt, Barry Gold anodized aluminum clevis clamps
Wright, Hughes) around a chassis tube and connects to
ALL60248 ..... Outside /Center Mounting (Rocket) the 3/4" rod end on the long end of a
ALL60249 ..... Center Mounting
J-bar style Panhard bar. After loos-
ening the two Allen bolts, the clamp may
be slid up or down on the chassis tube to adjust
the bar and change roll center. ALL60183
ALL60182 ..... 1-1/2" I.D.
ALL60183 ..... 1-3/4" I.D.
www.allstarperformance.com 189