Page 190 - 2018 Allstar Performance Parts and Equipment Catalog

SUSPENSION Limiter Chain Kit J-Bar Style Panhard Bar

Commonly used to limit rear suspen-
With Rubber Center ALL56157
sion or lift bar travel. Chain can be
Adjustable J-bar
easily cut to required length. Shrink
style Panhard
sleeve installs over chain and when
heated with a heat gun shrinks to keep chain in position
center to cushion side
and prevent chain from binding or catching on itself.
loading and improve handling. Bar is 1-1/2" dia. steel
ALL64312 ..... 3/16" Diameter Accepts 3/8" Pin or Bolt bar has a rubber
tubing. Center-to-center length adjusts from 18-1/2" to 23".
ALL64314 ..... 5/16" Diameter Accepts 1/2" Pin or Bolt Replacement Parts
ALL18440 ..... Washer
Axle Tube Bracket ALL68324 ALL56162 ..... Rubber Bushing
Bracket clamps around 3" wide axle tubes ALL99051 ..... Threaded Rod
providing a mounting point for a suspension
limiter such as a limiting strap or chain. 1" Panhard Bar Spacers
wide bracket has tabs with 1/2" holes. Spaces Panhard bar away from rear
mounted power steering, brackets,
Clamp-On Rings etc. Aluminum or steel. 3/4" I.D.
Steel brackets bolt to 3" axle tubes. Choose ALL56144 .....Aluminum ALL56144 ALL56145
from five widths in 1-, 2- and 4-bolt designs. ALL56145 ..... Steel
ALL60143 ..... 1-Bolt, 5/8" Wide
ALL60144 ..... 2-Bolt, 1" Wide ALL60143 Cut-To-Fit J-Bar Style Panhard Bars
ALL60145 ..... 2-Bolt, 1-3/4" Wide Cut-to-fit bar
ALL60146 ..... 2-Bolt, 2" Wide is an unwelded
ALL60147 ..... 4-Bolt, 3" Wide ALL60145 kit offering the ability to build a
custom length J-Bar with up to a 27" long center to
Panhard Bars center distance, enough to work with most chassis. Bar is
Panhard bars formed from .250" wall, 1-1/2" dia. steel
are formed tubing, has a 4" drop, includes a threaded
from 1.250" tubing with 3/4"-16 threads insert and rod ends.
in each end. For use with 3/4" RH rod ends ALL56141 ..... Bar With Standard Rod Ends
and clamp-on brackets (ALL60180 or ALL60181). ALL56142 ..... Bar With Aircraft Rod Ends Standard Aircraft
Center-to-center length reference is figured including ALL56143 ..... Replacement 3/4"-16 Insert Rod End Rod End
rod ends. Rod ends sold separately.
ALL56146 ..... 29" Center-To-Center Heavy Duty 3/4"
ALL56147 ..... 30-1/2" Center-To-Center Chrome Moly Rod Ends
ALL56148 ..... 32-3/4" Center-To-Center Heavy duty or often referred to as
“Aircraft Style”, these 4130 chrome
Adjustable J-Bar Style Panhard Bars moly rod ends have larger bodies which
Bars are formed from make them thirty percent stronger than
1-1/2" steel tubing standard 3/4" rod ends. These rod ends
and mount to the pinion rather than the axle tube are commonly used on Panhard bars and ALL99314 ALL99315
to maintain adequate driveshaft clearance. J-bars lower strut rods.
have 3/4" rods ends and allow up to 2" of adjustment. ALL99314 ..... RH Male, 3/4" x 3/4"-16
ALL99315 ..... RH Female, 3/4" x 3/4"-16
Part No. Drop Description
ALL56155 4" 17-1/2"-19-1/2", 6.2 Lbs.
ALL56156 4" 19-1/2"-21-1/2", 6.2 Lbs. Panhard Bar/Third Link
ALL56153 6" 17-1/2"-19-1/2", 6.7 Lbs. Brackets
ALL56154 6" 19-1/2"-21-1/2", 7.0 Lbs.
Brackets have a built-in arch for adjust-
Replacement Parts ment of the Panhard bar or third link angle
ALL99050 ..... Replacement Threaded Adjuster without changing the length of the arm.
ALL99052 ..... Adjuster Nut Brackets are 1/8" thick. Sold as a pair.
ALL58072 ..... 3/4" Male Moly Rod End
ALL60162 ...6-Hole Brackets With 1/2" Holes ALL60162 ALL60167
Adjustable Panhard Bar Wrench ALL60163 ...6-Hole Brackets With 5/8" Holes ALL60163
ALL60165 ...6-Hole Brackets With 3/4" Holes ALL60165
ALL11192 ALL60167 ...5-Hole Brackets With 3/4" Holes
Wrench is designed to work
with adjustable Panhard bars
with 1-3/8" adjusters. Shorter than a standard wrench, this
wrench is convenient for making adjustments in tight areas.
188 www.allstarperformance.com