Page 87 - 2018 Allstar Performance Parts and Equipment Catalog

NEW!
MSD Box Mount Spark Plug Race
ALL81330 Wire Sets
Box mount provides a Custom length SBC wire
quick release method for sets feature 8mm spiral core race wire with
replacing MSD6420, 6425, pre-terminated ends and universal coil wire. Sets feature
6430 and other ignition shrink sleeved ends and cylinder identification numbers.
boxes with 7-1/2" x 3-1/2" ALL81365 ..... Set Without Sleeving, Under Header
center to center mounting ALL81366 ..... Set Without Sleeving, Over Valve Cover
dimensions. Kit includes aluminum box mount, four quick ALL81370 ..... Set With Sleeving, Under Header
turn fasteners, springs and 1/8" aluminum rivets. ALL81371 ..... Set With Sleeving, Over Valve Cover ELECTRICAL, GAUGES & IGNITION

Spark Plug Universal Spark Plug Race Wire Sets
Index Shims Universal length 8mm spiral core wire
Stackable shims index spark sets include a non-terminated
plugs at 30° intervals up to 360° end, ends and boots for
properly positioning ground strap a build to length option.
in cylinder head for increased power and ALL81360 ..... Set With 90°
clearance between spark plug and piston. HEI Ends
Shims are intended for use with 14mm flat ALL81361 ..... Set With 135° HEI Ends NEW!
seat spark plugs only. Package of 24 shims
contains 12 silver 60°, 12 black 90°, detailed instructions Coil Wire Kits NEW!
and dial chart. Kit includes 36" of spiral core race 8mm wire,
ALL96505 ..... Shim Kit, Standard O.D. (.800") ends, connectors and wire stripping/crimp tool.
ALL96506 ..... Shim Kit, Small O.D. (.720")* ALL81380 ..... Kit Without Sleeving
*Shims are designed for close tolerance spark plug pockets such as those on ALL81381 ..... Kit With Sleeving
ALL-PRO cylinder heads.
Spark Plug Boot Sleeves
Spark Plug Indexing Tool ALL96510 Fiberglass braided sleeves are heat resistant to protect
Indexing positions spark plug boots from header heat up to 1,200°F. 7-1/2"
the ground strap long sleeves slide over a variety of boots.
of the spark plug ALL34272 ..... Natural, 8-Pack
properly for best ALL34273 ..... Natural, 2-Pack
piston dome clearance and un-shrouds the electrode for ALL34274 ..... Black, 8-Pack
a more even burn and possible gains of 5-15 horsepower. ALL34275 ..... Black, 2-Pack
Works with flat gasket or taper seat 14mm spark plugs.
Includes instructions. SB Chevy
Spark Plug Wire Loom Set ALL81340
Spark Plug Gap Tool Polished aluminum spark plug
ALL96515 wire loom fits wires up to 9.5mm.
Used to set consistent plug gap. Includes mounting hardware.
Insert plug into holder, then put feeler Engines with center bolt style valve
gauge between ground strap and electrode. covers require ALL81341 mounting kit. Package of 2.
Gently turn knurled knob until feeler gauge is snug. Note: may not clear oil dipstick or exhaust manifolds on
some later model engines with “log” style manifolds.
Spark Plug Gap Tool Kit Related Item
ALL96516 NEW! ALL81341 ..... Mounting Kit For Centerbolt Covers
Spark plug gap tool quickly and Spark Plug Wire ALL81341
accurately gaps 14mm threaded
spark plugs. Thread spark plug into Separator Set ALL81345
tool, place the correct size feeler Black plastic set will fit up to 9mm
gauge beneath the ground strap wires. Includes two of each 2-, 3- and
then tighten knob to set 4-hole separators.
plug gap. Includes 17 dif-
ferent feeler gauge sizes Spark Plug Wire Retainer ALL81350
.010" thru .035".
No more melted plug wires from hot exhaust.
These aluminum retainers will neatly
mount separated 4-wire sets to the front
or rear of cylinder head. Package of 2.
www.allstarperformance.com 85