Page 402 - Chief Architect Reference Manual

Chief Architect X10 Reference Manual

Wall Covering Panel
The WALL COVERING panel is also available
in the Room Specification dialog. See
Room Specification Dialog.

1 All wall covering materials applied to • Enter the heights of the current wall cov-
the selected wall are listed here. Select ering’s Top To Ceiling and Floor To Bot-
one from the drop-down list to edit its tom. The wall covering’s Height from its
position or remove it from the wall. top edge to its bottom edge can also be
• Click Add New to apply a new wall cov- specified.
ering to the selected wall. See “Select • Check Interior and/or Exterior to apply
Library Object Dialog” on page 940. the wall covering to the inside and/or out-
• Click Replace to replace the current wall side of the selected wall. Interior is
covering with a new one from the library. checked by default. Not available for
rooms. See “Wall Type Definitions” on
• Click Delete to remove the current wall page 383.
covering from the selected wall.
Preview panes showing the current wall 3 Most wall coverings are best previewed
using the Standard Rendering
covering display the row of buttons. Technique. See “Dialog Preview Panes” on

2 Specify the Position of the selected page 42.
wall covering.

402