Page 113 - FreesStyler® Installation and Startup

®
INSTALLATION AND STARTUP

Chapter 6 Undercarriage

Undercarriage Overview

There are two available Undercarriage styles as shown below. Follow the appropriate instructions for
the one that suits your location.
The In-Ground Undercarriage system consists of a stainless steel water manifold with 3/4” NPT
threads on each side, an undercarriage water valve assembly, three 65° x 2.0 GPM nozzles, a 3/4”
stainless barb hose fitting, a 3/4” stainless cap, a 3/4” stainless female elbow, two 3/4” ear clamps for
the water line, and the four lag bolts to mount it to your floor. All these misc. fittings will need to be
assembled in the field. Be sure to apply liquid Teflon to all stainless fittings before tightening down.
Note: Whatever side your utility connections are on, be sure that you tighten the 3/4” stainless elbow and
3/4” barbed hose fitting to that same side of the manifold for an easy connection of your water line.
Tighten the 3/4” stainless cap to the opposite end.

Note: Before mounting the manifold to the floor, keep in mind these notes. The flo-drilled holes in the
manifold are angled at 5°, which will face into the tunnel. Also be sure to position the center nozzle
hole of the manifold 5” towards the driver side of the doorways centerline.
FressStyler® Undercarriage (In-Ground)

Tunnel Style Undercarriage (Above-Ground)

1MANUL220 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 6-1