Page 15 - Multi-Purpose Arch

MULTI-PURPOSE ARCH

Installation

Assembly

Helpful Hint
Be sure to line up your Tee’s with the hole on the Plastic Pandant before you tighten it down.
The following two steps should be performed on the Ground before standing the Arch up.
1) Place the Detail Plate of one of the Leg Assemblies against a rigid wall surface with the pipes
facing up. Slide one of the supplied Foam Sleeves onto the leg making sure the holes line up.
2) Repeat the process on the other Leg Assembly.
3) Slide the Pendant onto one of the Leg Assemblies.
4) Before you begin to tighten the Fittings onto the Manifolds, you will need to spread the ends of the
pipes. This can be done by using a wedge or chisel-type tool. This will allow more room for
tightening down the fittings as shown below.

1MANUL115 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (810) 349-7010 * Fax (248) 380-9681 13