Page 16 - Multi-Purpose Arch

MULTI-PURPOSE ARCH

Installation

Assembly
5) Secure the Tee and the Male Connector to the driver side Manifold on the entrance side of the
Arch then do the same for the passenger side Manifold on the exit side of the Arch. See image
below.
Use stainless-steel compatible Teflon™ tape and Liquid Teflon™ on ALL fittings.
Male
Manifold Connector
Tee
Before After

6) Secure the Female Adaptors to the two remaining Manifolds along with the Spacers (part #6470)
and the Nipples as shown below.

Nipple

Foam
Spacer

Female
Adaptor

Before Manifold After

Helpful Hint
It is helpful to try to keep the flat edges of the Female Adaptor parallel with the Tee. This wll allow
more space making it easier to install and remove. See image below.

Flat side between pipes
allows more space

Flat side beteeen pipes
allows more space

Vehicle Travel

7) Confirm that all fittings are tight.

14 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (810) 349-7010 * Fax (248) 380-9681 1MANUL115