Page 18 - Wave Wrap™

WAVE WRAP™

Installation

Attaching the Booms

Note: Determine the driver side and passenger side by making sure the brass cylinder is facing
inward as the booms point toward the exit of the tunnel.

1) Locate the passenger side boom assembly. Remove the boom shaft bearings from the
passenger side stand. Slide the bearings onto the boom-mounting shaft. Secure the boom
to the stand assembly.

2) Locate the driver side boom assembly. Remove the boom shaft bearings from the driver
side stand. Slide the bearings onto the boom-mounting shaft. Secure the boom to the stand
assembly.
Side View

Bearing
(typical)

Boom
(typical)
Stand
(typical)

Attaching the Cylinders and Oil Reservoirs
1) Secure the cylinders to their mounts and oil reservoir mounting brackets to both booms.

Cylinder mounts Oil reservoir mount

16 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL864