Page 23 - Wave Wrap™

WAVE WRAP™

Installation

Utilities

Hydraulic Connections
1) From the hydraulic supply manifold, run hydraulic hose to the hydraulic fitting on the
distribution block located on the WAVE WRAP™ passenger side boom.
2) Run hydraulic hose from the second fitting of the passenger side distribution block to the
driver side booms distribution block.
3) From the second driver side fitting, run the hydraulic line back to the hydraulic return filter on
the tank.
4) Purge hydraulic lines and set shaft speed to approximately 72 to 80 RPM.
5) Check system for leaks.

Overhead View

Distribution block
(passenger side)

Feed from hydraulic
Feed to supply tank
driver side
distribution
block

Distribution block
(driver side)

Hydraulic Supply

Hydraulic Feed from Return feed
Feed passenger side to hydraulic
distribution supply tank
block
Hydraulic
Return
Confirming Wheel Rotation
Note: Be sure to match the wheel rotation shown above. If the rotation is opposite as show
below, reverse the hydraulic feed lines to the motor.

1MANUL864 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 21