Page 20 - Foam Bullet™

Foam Bullet™

Installation

Mounting the 4X Mount to a Frame

In order to mount the Foam Bullets™ to a 4”x4” or 4”x6” Frame the 4X Mount Kit and the appropriate length
bolts must be used.
Note: If mounting to a 4 x 4 frame, use the provided 1/2-13 x 3-1/2” bolts and 1/2” lock-washers

Note: If mounting to a 4 x 6 frame, use the provided 1/2-13 x 5-1/2” bolts and 1/2” lock-washers.

1) Locate the 4X Mount Kit which contains the following components parts:

1/2-13 x 3-1/2” Fastener 1/2-13 x 5-1/2” Fastener
4X Mount Kit
& 1/2” Lock Washer & 1/2” Lock Washer

2) Loosen the bolts on the 4x Mount and separate the two halves of the bracket.
3) Position the Mounting Brackets in the desired position on the frame. Then using the
proper bolts with washer secure the Mount Bracket to the frame.

1MANUL022 Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 16