Page 25 - Foam Bullet™
P. 25

Foam Bullet™


                       Installation



                       Mounting the Flat Mount to a Frame
                              1)  Locate the Flat Mount Kit which contains the following components parts.

                                                                                         SHCS SS 1/4-20 x 1/2”
                                       Flat Mount Kit                 Mount Plate
                                                                                               Fastners
















                              2)  Place the Flat Mount Plate on the frame and determine the location for the mount then
                                 mark the position of the mounting screws.
                              3)  Tap  two  holes  in  the  frame  for  the  mounting  screws.  Open  the  holes  up  in  the  Mount
                                 Plates to 9/32” after marking.
                              4)  Secure the Flat Mount Kit to the frame with the 1/4-20x1/2” screws provided in the kit, as
                                 shown below.















                                                            Mount Plate






                                      Clevis & Pivot Mount

                                                                    1/4-20x1/2”
                                                                    Cap Screws









                        1MANUL022        Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681   21
   20   21   22   23   24   25   26   27   28   29   30