Page 29 - Foam Bullet™
P. 29
Foam Bullet™
Installation
Mounting Foam Bullets™ with the Oval Mount
The Oval Mount Kit must be used when mounting Foam Bullets™ to any Signature Series frame. This
manual will show the Foam Bullets™ being mounted to the crossbeam of the Signature Series Top
Wheel. The recommended location is shown below.
Overview
Top View
The 38” dim. is
taken from the
outside edge of
the crossbeam.
Helpful Hint
Dimensions and
38” 38” placement are
recommendations.
Actual placement
may vary per
location and
cusomer preference.
Moving the Foam
Bullets™ closer to
the ends will allow
for wider coverage.
1MANUL022 Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 25
