Page 24 - Foam Bullet™
P. 24
Foam Bullet™
Installation
Mounting Foam Bullets™ with the Flat Mount
The Flat Mount Kit is a universal mount that can be used to mount a Foam Bullet™ to any new or
existing flat surface in the car wash. This manual will show the Foam Bullets™ being mounted to the
Chameleon Utility Arch using the Flat Mounts. The recommended location is shown below.
Overview
Front View
84” 84”
84” from center of top Proper orientation of the
mount hole to floor Mount Bracket Base Plates
84” orientation
Helpful Hint Helpful Hint
Dimensions and placement To install the pair of Foam Bullets™
are recommendations. at the same height you may have to
Actual placement may vary rotate the mount base plate so that
per location and customer the top hole is toward the center of
preference. the tunnel as shown above.
Floor
Top View
123” (between top mount holes)
1MANUL022 Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 20
