Page 22 - Foam Bullet™

Foam Bullet™

Installation

Attaching the Foam Bullet™ to the 4X Mount

4) Insert the mounting tab on the Foam Bullet™ into the clevis and secure the 4X Mount and
Foam Bullet™ together using the provided 3/8-16 x 1-1/2” fastener, washers and nut.

5) Repeat this process for the other Foam Bullet™ Assembly.
6) The position at which the Foam Bullets™ are aimed at the vehicle can be fine tuned by
making adjustments to the Multi-Axis™ 4X Mount as follows:
 Rotational: Loosen the two fasteners connecting the Pivot Mount to the Mount
Bracket then rotate the Pivot Mount, Clevis and Foam Bullet™ assembly to the desired
position and retighten the fasteners.

4X Mount Bracket Loosen the two fasteners
connecting the Pivot Mount to the
Mount Bracket then rotate the
Foam Bullet™

Pivot Mount

Foam Bullet™

1MANUL022 Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 18