Page 33 - Foam Bullet™
P. 33
Foam Bullet™
Installation
Attaching the Foam Bullet™ to the Oval Mount
5) The position at which the Foam Bullet™ is aimed at the vehicle can be fine tuned by making
adjustments to the Multi-Axis™ Oval Mount as follows:
Rotational: Loosen the fasteners connecting the Pivot Mount to the Mount Bracket then
rotate the Pivot Mount, Clevis and Foam Bullet™ assembly to the desired position and
retighten the fasteners.
Loosen the two fasteners
connecting the Pivot Mount to
the Mount Bracket then rotate
the Foam Bullet™
Oval Mount Bracket
Pivot Mount
Foam Bullet™
Vertical Pivot: Loosen the fastener connecting the Clevis to the Pivot Mount; pivot the
Clevis and Foam Bullet™ assembly to the desired vertical postion and retighten the
fastener, see image below on left.
Pivot Mount
Loosen the fastener connecting
Clevis the Foam Bullet™ to the Clevis
then pivot the Foam Bullet™
Loosen the fastener
connecting the Clevis to Foam Bullet™
the Pivot Mount then Clevis
pivot the Foam Bullet™
Vertical Pivot Horizontal Pivot
Foam Bullet™
Horizontal Pivot: Loosen the fasteners connecting the Foam Bullet™ Mount Tab to the
Clevis; pivot the Foam Bullet™ to the desired horizontal position and retighten the
fastener, see image above on right.
1MANUL022 Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 29