Page 38 - Foam Bullet™

Foam Bullet™

Utility Connections

Chemical and Air Connections for a Set of Three Foam Bullets™

10) Connect the 3/8” black airlines for the Compressed Air to the three-way fitting and run these
lines inside the channel in the Chameleon Arch and connect them to the Foam Bullets™, refer
to the image below.

Helpful Hint
Be sure to cut all of the airlines to the same length to ensure even distribution of the chemical solution to each of the Foam Bullets.
The airlines for the Foam Bullet mounted to the center of the arch can be coiled inside of the center pendant as shown in the images.

Field Supplied
3-Way Divider
Fittings

Three (3) White 3/8”
Airlines of equal length
for Compressed Air
Three (3) Black 3/8”
Airlines of equal length
for Compressed Air

11) Connect the 3/8” clear airlines for the Chemical Solution to the tee and run these lines inside
the channel in the Chameleon Arch and connect them to the Foam Bullets™, refer to the
image above.

12) Measure and cut the Filler Strips to the proper lengths to fit around the airlines and reinstall
them onto the arch.
13) Turn on the MixStir®, make sure that the solution is spraying out of the Foam Bullets™
properly.

1MANUL022 Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 34