Page 41 - Foam Bullet™
P. 41

Foam Bullet™


                       Utility Connections


                       Electrical Connections: Foam Bullet™ LED


                          7)  Wrap the connection with electrical tape to protect it from the car wash elements.

                          8)  Tuck  the  electrical  connection  into  the  Foam  Bullet™  and  reassemble  the  Cord  Grip
                              Connector onto the Foam Bullet™ and fasten the Power Cables to the equipment frame with
                              zip ties.








                                                                        Cord Grip Connector





                                                                                         Foam Bullet ™ Mount is
                                                                                         transparent for clarity






                                                                                          Foam Bullet™









                          9)  Connect the 24VDC Power Supply to an output on the car wash controller.
                          10) Using the controller, turn on the Foam Bullet™ LEDs and verify they are working properly.



























                        1MANUL022        Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681   37
   36   37   38   39   40   41   42   43   44   45   46