Page 37 - Foam Bullet™
P. 37
Foam Bullet™
Utility Connections
Chemical and Air Connections for a Set of Three Foam Bullets™
Note: The images in this section will show Foam Bullets™ on a Chameleon Utility Arch being
connected to the Chemical Delivery System. However, the following steps can be used when
installing a set of three Foam Bullets™ on any tunnel equipment.
7) Locate the supplied 3/8” airlines. The black airline will be used for Compressed Air and the
clear airline will be used for the Chemical Solution.
3/8” x 100’ BlackPoly-flow 3/8” x 100’ Clear Poly-flow
Airline for Compressed Air Airline for Chemical Solution
8) Measure the distance from the three-way divider fitting to the fitting on the Foam Bullets™.
Be sure to add a few inches to the measurement to have slack in the airline so the Foam
Bullets™ can be adjusted. Cut all of the 3/8” airlines to the same length.
9) If the Filler Strips are installed remove them from the Chameleon Arch, as specified below.
Remove the Filler
Strips from these
areas of the arch.
Remove the Filler
Strips from these
areas of the arch.
1MANUL022 Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 33
