Page 13 - Prep Jet System
P. 13
PREP JET SYSTEM
Installation
Assembly
8) There is an optional overflow tube installed on all tanks. If it is to be utilized, a hose will need to be
run from the tanks overflow tube to a drain that is in accordance with your local and national
codes.
Feed to Drainage
CAUTION
Keep in mind that there should be a minimum of 3 feet (91.4 cm) of flexible hose between the
pump outlet and any hard piping.
CAUTION
THIS PREP JET SYSTEM HAS BEEN SHIPPED WITH TWO SHUT-OFF GUNS, WITH
#1NOZZL-MG300 (15 DEG @ 0.7 GPM, MEG NOZZLE) NOZZLES INSTALLED. THESE
NOZZLES HAVE BEEN PROPERLY SIZED FOR TWO GUN OPERATION
If one gun operation is desired, the nozzle must be changed to a #1NOZZL-MG350 (15 DEG @
1.5 GPM, MEG NOZZLE). This will increase the volume of water at the gun and will lengthen
the life of the Unloader Valve and/or the pump itself.
1MANUL603 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 11
