Page 60 - Saber® Installation & Startup
P. 60
INSTALLATION & STARTUP
Chapter 5 Electrical
E-1063 Operator Interface
Modem Overview
Typically a single bay Saber® system requires (1) DEDICATED analog telephone line with an RJ-
11 Connector terminal inside the E-1063 enclosure.
If you purchase a customer interface device that has credit card capability, you will require a
SECOND DEDICATED line for its use. These two items will NOT work well on a single line.
Installation
The installation contractor should provide a standard RJ-11 plug-in jack next to the E-1063 from
the same dedicated line serving the Modem for use in plugging in a telephone.
Power Switch
Power Connection
RS232 Connection
DIP Switches
Not Used
Phone Line
The above image shows the components located inside of the Saber® E-1063 HMI Enclosure
REFER TO YOUR SUPPLIED ELECTRICAL PRINTS, AND
SITE SPECIFIC DRAWINGS FOR INSTALLATION DETAILS
5-10 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL290
