Page 47 - FreeStyler® E-1063 Programming and Operation Manual
P. 47
E-1063 PROGRAMMING AND OPERATION
Chapter 5 Operator Interface/Advanced Configuration
Setup / Advanced Configuration
Screen Key
The following selections move you to their corresponding screens
• ADVANCED CONFIGURATION
• OUTPUT NAMING
• OUTPUT “ON WITH” CONTROL
• ENTER WHEEL SETUP
• TOP WHEEL SETUP
• EXIT WHEEL SETUP
• Lower Field indicates in seconds the time it took to
complete the last wash
Factory password for this level is 4444.
Advanced Configuration / Application Configuration
Screen Key
• The following selections AC 1 through AC 12 take you to
the corresponding Application Configuration
• The names of the Applications may have changed
For demonstration purposes we have used the title “FRICTION” on these Application Configuration
screens
1st Application Configuration Screen Screen Key
• The first screen of the actual “Application
Configuration” programming area is the “NAMED
1-8” screen in order from top to bottom
2nd Application Configuration Screen Screen Key
• Pressing the “MORE” key will take you to the
second screen of the “Application Configuration”
programming area is the “MISCELLANEOUS
NAMED 1-8” screen in order from top to bottom
• Back and Front Distances are changed on this
screen and set in inches
• Active Functions for Back, Front and Center are
selected from this screen
1MANUL224 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 5-1