Page 18 - Quad Wave Mitter Signature® Series

QUAD WAVE MITTER Signature ® Series

Installation

Cleaning Material

This section will explain the cloth installation procedure.
Note: All mitter cloth is now 3” wide strips. The length will vary depending on the component in
which the cloth is to be installed.

CAUTION

Do not install any cloth until all equipment has been installed, turned on and checked for
hydraulic, pneumatic and water leaks.
Locate the following hand tools:

1-1/8” wrench 9/16” socket
5/16” hex wrench work gloves
3/16” hex wrench safety glasses
ladder

Collar Placement
Placement typical on all eight Collar and Bearing Assemblies.

Helpful Hint

Collar Assembly

Collar Assembly secures
flush (large side towards
the center of frame) against
“C” shaped spacer.

14 Belanger, Inc. *PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL634