Page 22 - Quad Wave Mitter Signature® Series
P. 22
QUAD WAVE MITTER Signature ® Series
Installation
Cleaning Material
9) Loosen the two lower bolts shown below approximately 3” out.
Note: Be sure to loosen the bolts on the side with the four plastic Mitter Wave pegs protruding
through the aluminum plate, as opposed to the side with four lower bolts.
Side View
1-1/8” bolt
Loosen these bolts
and back them out
approximately 3”
10) From the center of the machine, separate the 11 Mitter Waves from the inside end plate.
18 Belanger, Inc. *PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL634
