Page 21 - Quad Wave Mitter Signature® Series

QUAD WAVE MITTER Signature ® Series

Installation

Cleaning Material

5) Remove lower inside retainer pins from the lower drive arm.
6) Remove the lower drive arm.
7) Remove 1-1/8” outside rack connector bolt.
8) Remove the bolt locate behind the shaft bearing of the follower rack.
Pitman arm
1-1/8” bolt,
(remove for cloth installation, typical)
Retainer pin
Upper drive arm (remove for cloth installation, typical)

Remove the bolt
located behind
Shaft bearing
this bearing for (black urethane plastic) (typical)
cloth installation
(typical)
Outside collar
(anodized aluminum)
(typical)

Lower drive arm
(remove for cloth installation)

(View from in between the two racks)

Drive Rack Follower Rack

®
Mitter Wave peg
(typical)

1MANUL634 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167 -5470* Ph (248) 349-7010 * Fax (248) 380-9681 17