Page 23 - FreEsStyler® E-1032 Programming and Operation Manual

E-1032 PROGRAMMING AND OPERATION

Chapter 3 Operator Interface/Programming

Setup

Setup / Misc
E-1032

PASSWORD RE-LOGIN LEVEL: The system allows for multiple levels of access that require a password for each
level. Cursor to the last word in the RE-LOGIN line (PASSWORD RE-LOGIN LEVEL NONE) to change the
selection. Log-in levels are shown above in “Screen Key”. When user presses the screen navigation keys, they
will automatically be prompted to enter a password. Once password is entered access will be allowed for 5
minutes. If more time is required, temporarily set password Re-login level to NONE.

Example: If Re-Login Level is 3 and User has logged in at Level 3, the system would eventually time out and
restore access to Level 2. Once level restored (reduced) to Level 2, the User will be required to enter a
password to return to Level 3 access.

WEEP: This toggles between ON/OFF. When ON, Weep is enabled. MODE toggles between SCALED and
ON/OFF. For SCALED, the duty cycle is increased as the temperature decreases. When ON/OFF, the system is
in constant WEEP for temperatures below 34° Fahrenheit.

TEMP SCALE: Here you can calibrate the Temperature Scale. User can adjust temperature by + 9°/-15° of what
the sensor is reporting.

DISABLED E-STOP FAULT: Toggles between DISABLED and ENABLED. When ENABLED, system will page
out when an E-Stop is pressed.

SONAR BACK ADDER: This is the number of inches after the Sonar reads the floor that the Carriage will stop
before B/F IN.

TIME AND DATE SETTINGS: The Time and Date fields are accessed by pressing on the corresponding buttons.
Each button will move you a screen where you will input the appropriate numbers for the current time and date.

1MANUL226 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 3-5