Page 26 - FreEsStyler® E-1032 Programming and Operation Manual

E-1032 PROGRAMMING AND OPERATION

Chapter 3 Operator Interface/Programming

Setup

Setup / More
Setup / More / Exit Operation
E-1032 Screen Key
• Values to the right of the YES/NO toggles are
measured in seconds
• Pressing the MORE key will navigate to Entrance
Operation 2 and 3

Fields to the right of “Exit Operation” allows changing the name of the function.

ON and OFF Columns: There are two fields under these headings. The left columns are YES/NO toggles and the
right columns display values in seconds. Seconds values may be changed in increments of tenths of a second/
This system is equipped with 3 Exit Functions.
Each of these functions could utilize one, all or any combination of ON conditions. The ON condition that is met
first will turn on the functions output.
Each of these functions could utilize one, all or any combination of OFF conditions. The OFF condition that is met
first will turn off the functions output.
These functions will not operate on the vehicle unless toggled to YES in the Package Setup.
Wash End: This is when the wash has completed its last programmed path (Application). The machine will be
rapidly Homing as the exit features are turning on.
EFP (End Function Pulse): This is designed to turn on exit functions while wash is still in progress. Each
package has a Pass Number and a position from completing that pass that it turns on its EFP.
Exit 1 Photo, Exit Door: These are all inputs that require a “light-operated” Photo-Eye (i.e. the input turns off
when the vehicle blocks the Photo-Eye beam). The ON condition for these is when the input turns off. The OFF
condition is when the input turns back on.

Max-Time: This is an OFF condition only. It’s a maximum time that a function will stay on once it turns on.

3-8 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL226