Page 49 - TopWinder®

®
®
TopWinder

Maintenance

Routine Procedures
Daily
 Start with a “Test Wash” to insure proper operation of all equipment.

 Check overall performance for any abnormalities.
 Inspect for clogged nozzles. This can best be done while running the “Test Wash”. Nozzles
can be cleaned by removing the nozzle bodies and tapping or inserting a thin wire into the
nozzle opening.
 Check for water, chemical, or air leaks after equipment is turned off.
 Check all water hose connections for leaks.

Weekly
 Verify that Hub Caps on the Hub Assembly are tight to the media and secured in place.
 Go through the Hub Assembly and make sure that all fasteners that hold the Hub Skins in
place are tight.
 Check counter weight on the TopWinder® cleaning wheel to confirm the desired balance.
Adjust as necessary.

 Check penetration weight of the TopWinder® cleaning wheel. Add or remove counter
weight as needed.
 Hose down the component and surrounding area. This will remove the majority of the dirt
and other debris that builds up throughout a week.
Monthly
 Wash TopWinder® components down. See Powder Coat Cleaning procedure.

 Check ShineMitt™ cleaning material for wear. Replace if necessary.

1MANUL755 Belanger, Inc.® * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 45