Page 54 - TopWinder®

®
®
TopWinder

Maintenance

Hub LED Light Replacement
7) Slide the End Plate down the Drive Shaft toward the Hub Assembly; thread the four Wire
Harness Plugs through the holes in the End Plate.

Step 7:
Thread the four Wire Harness
Plugs through the holes in the
End Plate.

8) Insert the LED Wires into the circular slots on the outer edge of the End Plate.

Step 8:
Insert the LED Wires in the
circular slots on the End Plate.

9) Apply dielectric grease to the receptor on the new LED light. Align the indicators on the LED
Receptor and the Wire Harness Plug and press them together gently so the pins do not get bent.
Step 9a:
Apply dielectric grease
to the new LED Light
Receptor.

Step 9b:
Align the indicators and
press the connectors
together gently.

10) Wrap the new LED light connection with electrical tape to protect it from the car wash elements.

50 Belanger, Inc. ®* 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL755