Page 22 - Quad Wave Mitter®

®
QUAD WAVE MITTER

Installation

Cloth

9) Loosen the two lower bolts shown below approximately 3” out.

Note: Be sure to loosen the bolts on the side with the four plastic Mitter Wave pegs protruding
through the aluminum plate, as opposed to the side with four lower bolts.
Side View

1-1/8” bolt

Loosen these bolts
and back them out
approximately 3”

10) From the center of the machine, separate the 11 Mitter Waves from the inside end plate.

18 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL633