Page 29 - Foaming Pods

FOAMING PODS

Utility Connections

Connections for Foaming Pods

If you have purchased the Triple Foaming Pods, follow directions below for Distribution Manifold to
Pods connections.

Triple Foaming Pods: Using the image below, make the initial air-line connections. These are
the connections for the chemical/water feeds.
Helpful Hint Helpful Hint
Be sure to cut Be sure to keep all air-lines from both
all air-lines to pods in alignment (matched up).
the same
length to
ensure even Supplied 1/4”
water and air-line
chemical
distribution to
both sides.
Flow Control

Using the image below, make the initial air-line connections. These are the connections for the air
(pneumatic) feeds.
Helpful Hint Helpful Hint

Be sure to cut Be sure to keep all air-lines
all air-lines to from both pods in alignment
the same (matched up).
length to Supplied 1/4”
ensure even air-line
water and
chemical
distribution to
both sides.

Check-Valve

Single Foaming Pods: If you have have purchased the Single Pod system a Distribution
Manifold is not required or supplied.
Using the image below, make the initial air-line connections. These are the connections for the
chemical/water feeds from one pod to the other using the supplied 1/4” tees.
1/2” poly-flow line in air feed
1/2” poly-flow line in
water/chemical feed Helpful Hint

Be sure to cut all air-lines to
Supplied 1/4” the same length to ensure
air-line even water and chemical
distribution to both sides.

Supplied Supplied
Tee Elbow

1MANUL770 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (810) 349-7010 * Fax (810) 380-9681 27