Page 27 - Stanochny park

INNOVATIVE TECHNOLOGY INNOVATIVE TECHNOLOGY

surface S is equal to zero. Although in created where the energy of polarization and a nanofilm on a surface allows one to regulate
classical physics, the following formulas are dispersion interaction of surfactants in fluorine (protect) from the action of external forces in such
used for a moving source (can be applied to compounds with the surface of materials, a way that if external forces are applied to the
the movement of molecules) and a stationary including those from composite alloys, should surface of the body, they acquire a tangentially
observer: be insignificant, therefore, the surface energy directed form tangential to this surface. The
values can be calculated with high accuracy ratio of the force to the area over which it acts
λ’ = λ(1 – βcosθ), f ‘ = f /(1 – βcosθ), based on existing methods. It is known that is called ‘‘stress‘‘[8], where the normal stress
the experimental determination of the affinity under compressed pressure on the surface can
τ’ = τ(1 – βcosθ), of fluorine to an electron was first analyzed by be determined by the formula:
V.M. Dukelsky and N.I. Ion, which measured
which at angles θ = ± π / 2 do not give the emission currents of positive and negative
any transverse Doppler effect, since with ions emitted by a red-hot tungsten filament in σ = Fγ / Si,
this value of the angle of the formula the a molecular beam of potassium fluoride vapor.
equations become equal: The adhesion of organic substances is where Fγ is the tangential force, and Si is the surface
enhanced if the liquid molecules, polymers are area to which it is applied.
λ’ =λ, f’ = f и τ’ = τ [4]. polar and have a large number of chemically Note that the thermal conductivity of liquids
active functional groups [6]. In this case, the is usually several times higher than the thermal
The main purpose of a photon is to molecules of a liquid or organic substances conductivity of gases under normal conditions, but
make fluorine molecules move in space can attach at one end to the surface of a ten (hundreds) times less than that of solids. An
more vigorously (rectilinearly according solid substance, and at the other end with a exception is liquid metals, in which the thermal
to Euclidean geometry) and force them mass of liquid or polymer molecules (Fig. 2). conductivity is close to the thermal conductivity of
to take a vertical position when deposited To test the release of specimen plates coated metallic solids, which is explained by the presence
on the surface (hydrophobic tail - non-polar with the Epilam SFK-05 composition TU2412- of electronic thermal conductivity.
part, hydrophilic - polar part of the fluorinated 002-13868195-2012, a two-component epoxy Fig. 3.Polycarbonate plate No. 1 - 0.49 MPa Despite the fractality and instability of the
adsorption layer Surfactant). phase state of fluorosurfactant compositions
The use of high-frequency ultrasonic during the application to the surface and physical
waves and ultraviolet radiation in some cases and mechanical effects on them, the compositions
with a high probability creates the nature of (epilame) retain the ability to form a monomolecular
alternative geometries, which can be used in film with a uniform distribution of the molecules that
composite materials, which are often used in create the coating, demonstrating the validity of the
complex environments. main law of the existence of matter which is from
The nature of the fluorine absorption chaos to order upon activation.
spectrum does not directly determine the Under these conditions, the role of man is
fluorine dissociation energy without the use reduced to controlling the thickness of the resulting
of technological analysis tools, exposure and layer by changing the conditions for applying the
absorption of quantum structures. Despite compositions and controlling the concentration of
the fact that the calculations are currently Fig. 4. Polycarbonate plate No. 3 - 0.77 MPa molecules and layers of nanofilms. At the interface
carried out indirectly (using the level of between the two phases (the composition is a solid),
surface energy, dissociation energy HF, heat in addition to adsorption, which is mainly due to
of formation or thermal conductivity of the physical interactions (mainly Van der Waals forces), a chemical reaction occurs when using
porous surface, taking into account the affinity adhesive was applied to the stop of the PosiTest fluorine surfactants.
of the surface for fluorine), the practical results device (GosNITI Nanocenter, Moscow). Further, The processes that determine the temperature changes in the analyzed heterogeneous
of using fluorinated surfactant nanofilms by rotational movements from under the stop, structure are much more complex, since along with the methods of activation and creation of
(Epilam) allow us to systematize the initial air was removed and excess glue was removed a monomolecular nanofilm discussed above exponentiation and change in porosity (towards
parameters of the studied parameters . The from the sample surface with a cotton swab uniformity), that is, the magnitude and type of interface and modification.
heat of dissociation of a fluorine nanofilm can [7]. To achieve maximum adhesion of the stop Ostwald ripening is neutralized by accelerating coalescence and lowering the level of
directly depend on the surface temperature of the PosiTest device to the surface of the test surface energy, which directly affects the wettability angle of deposited and developing moisture
of the material due to a slight difference in plates, they were left for 7 days. After 7 days, drops and aggressive liquids on the surface. High adsorption ability at the liquid – solid interfaces
the specific heat of the molecular layer of the a cut was made around the stop along the is determined by the adsorption rate of nanofilms, which is often described by the equation [9]:
substrate. perimeter of its circumference, after which a
To obtain a mathematical model separation test was performed. α = 0,856.10-11 + 8,900.10-7 С.
of the law of radiation of a black body, a According to the results of tests on the
‘‘universal constant‘‘h [5] is introduced, adhesion force of the stop-part of the adhesive This corresponds to a rectilinear dependence in the region of the Henry isotherm, i.e., the
which indicates that the radiation does not meter with polycarbonate plates coated with initial stage in which the first adsorption layer is formed.
propagate continuously, but in batches Epilam SFK-05 composition at GOSNITI, the Taking into account the specific resistance of semiconductors over a wide range (from
(quanta) so that the energy of each portion following data were obtained: 10-4 to 109 Ohm • cm), some semiconductors (silicon carbide, selenium, tellurium, etc.)
(quantum) is determined by the elementary - polycarbonate plate No. 1 - 0.49 MPa, change their electrical resistance with increasing voltage applied to them or under the influence
dependence hv. An algorithm (technology) is - polycarbonate plate No. 3 - 0.77 MPa. of light radiation. Fluorinated surfactant-based nanofilms, without changing the parameters of
The combination of factors for producing
26 Stanochniy park Stanochniy park 27