Page 434 - Wurth Total Catalogue

Wit p200 - accessories

Accessories B

Description Art. No. Image Pack Qty.
Blow Out Pump 0903 990 001 A 1 A
Application Gun 0891 003 104 B 1
Static Mixer 0903 420 001 C 10
Brush Set - 2 pcs 0903 990 002 D 1

C D

Sieve Sleeve
Description Dimensions Art. No. Image Pack Drill Drill Hole Suitable For Mortar
(mm) Qty. Dia Depth Thread Bar Internal Screw Content (mm)
(mm) (mm) Thread Sleeve (see graduation on
cartridge)
Sieve Sleeve 16 x 85 0903 44 160 10 16 90 M8, M10 - 12
Plastic 16 x 135 0903 44 161 10 16 140 M8, M10 - 16

20 x 85 0903 44 200 10 20 90 M12 M10, M12 20

Anchor Dimensions M8 M10 M12 M16 M20
Overall Length l (mm) 110 130 160 190 260
(for threaded rods)
Max. Attachment Thickness h (mm) 20 30 35 45 60
(for threaded rods)
Art. No.
Anchor Stud, Complete with 5915 108 110 5915 110 130 5915 112 160 5915 116 190 5915 120 260
Washer & Nut, Zinc
Art. No.
Anchor Stud, Complete with 0905 413 081 0905 413 101 0905 413 121 0905 413 161 0905 413 201
Washer & Nut, Galvanised Steel
Packing Unit Pack Qty. 10 10 10 10 10

Installation Instructions:

Material:
Perforated
Bricks.

Drill hole. Insert perforated Inject the adhesive starting at the back Insert the anchor rod or threaded Install component,
sleeve. of the hole/sleeve and completely fill sleeve into the mortar while slowly apply torque.
it by slowly withdrawing the mixer with turning. Note setting time.
each trigger pull.
Material:
Concrete,
Solid
Bricks. 45
AUS. pub. 07/14 © Drill hole. Clean drill hole. Screw mixer An initial amount Inject the adhesive starting Insert reinforcing Check mortar Note setting time. Install component,
at the back of the hole,
apply torque.
filling quantity
bar or threaded
onto cartridge.
(4 x blow out/ 4 x brush out/
of 10 cm adhesive
rod while turning.
visually.
4 x blow out) M20 and larger,
slowly withdrawing the
has to be discarded.
mixer with each trigger pull.
blow out with compressor.
06 2132