Page 470 - Foton Workshop Manual - Auman EST-M
P. 470

DI - 416                         Diagnosis - Mechanical fault diagnosis


                 Failure phenomenon            Possible reason                    Failure elimination

                                     Current  electric  error  code  is  current  or
                                                                       Read the error codes and perform service on the
                                     non-current  error  code  high  frequency
                                                                       failures in corresponding with the error codes
                                     counter

                                                                       Check  the  air-air  cooler,  AC  condenser  and
                                     Air-air cooler radiation fin
                                                                       radiation fin. Clean them if necessary
                                                                       Add coolant to the specified height and check if
                                     Coolant level lower than specification
                                                                       the cooling system leaks

                                                                       Verify the concentration of anti-freeze fluid in the
                                     Mixing  ratio  of  anti-freezing  liquid
                                                                       coolant  Add  anti-freezing  liquor  or  water to the
              Coolant temperature too high
                                     and water in coolant not correct
                                                                       correct concentration
                                     The fan shield is broken or missed, or the  Check  the  shield  and  deflector.  If  necessary,
                                     air deflector is broken or missed   repair, replace or install it
                                                                       Check the fan drive belt. If necessary, replace the
                                     Fan drive belt broken or loose
                                                                       belt
                                     Fan drive or control device failure   Check the fan drive and control device

                                                                       Test  the  thermometer  and  sensor.  If  necessary,
                                     Coolant thermometer or sensor failed
                                                                       repair or replace it

                                     Radiator cover not correct or failed or low
                                                                       Check the radiator pressure cover
                                     specification in standing pressure

                                     Thermostat broken                 Replace the thermostat
                                     Cooling system blocked or leaking   Check the radiator hose

                                     Filling  pipe  or  degassing  pipe  blocked,  Check if the degassing pipe and filling pipe are
                                     choked or pipeline arrangement not correct   arranged correctly and if they are blocked

                                                                       Check the engine oil level. If necessary, fill in or
                                     Engine oil higher than the requirement
                                                                       discharge the engine oil
              Coolant temperature too high
                                     Cooling system contaminated by dirt, scale
                                                                       Clean the cooling system
                                     or grease
                                                                       Refer  to  engine  oil  contamination  failure
                                     Engine oil contaminated by coolant or fuel
                                                                       diagnosis

                                     Coolant contaminated by engine oil   Refer to engine oil mixed in coolant

                                                                       Check  the  cylinder  body  pressure  and  replace
                                     Water pump failure
                                                                       the water pump if necessary

                                                                       Check  the  radiator.  Clean  or  replace  it  if
                                     Radiator core blocked or broken
                                                                       necessary





                                                          DI-416
   465   466   467   468   469   470   471   472   473   474   475