Page 2144 - Foton Workshop Manual - Aumark (BJ1099)
P. 2144
62-92 DIAGNOSIS-REVERSING RADAR
3. Check the harness and the connector ( body controller- the reversing radar sensor)
(a). Ignition switch:"LOCK".
(b). Disconnect the reversing radar left sensor connectors N01.
(c). Disconnect the body controller connector C57.
(d). Measure the resistance according to values
in the table below.
OFF
Standard resistance: (check whether there
N01 C57
16 15 14 13 12 11 10 9 8 is an open circuit)
3 1 32 31 30 28 27 25
4 2
Connect the pin by
Ω multimeter Standard value
C57(D31) - N01(1) ＜ 2Ω
fuwx62357
Is the result normal?
Yes>Replace the body controller.
No >Repair or replace the harness.
Page 2144
