Page 2219 - Foton Workshop Manual - Aumark (BJ1099)

DIAGNOSIS-WIPER AND WASHING SYSTEM 62-167

(b). Disconnect the front wiper high-speed relay
R11.
(c). Disconnect the connector A16 of the front
wiper motor.
(d). Measure the resistance with the multimeter
on the resistance range. 62
Standard resistance: (check whether there
is an open circuit)

Connect the pin by
multimeter Specified value
R11(5)-A16(3) ＜ 2Ω

Is the inspection result normal?
Yes>To step 8.
No >Repair or replace the harness.

8. Check the harness and the connector (front wiper motor-grounding)

(a). Ignition switch:"LOCK".

(b). Disconnect the front wiper low-speed relay
R10.
(c). Disconnect the connector A16 of the front
wiper motor.
(d). Measure the resistance with the multimeter
on the resistance range.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Specified value
multimeter

A16(4)-Grounding ＜ 2Ω

Is the result normal?
Yes >Replace front wiper motor.
No >Repair or replace the harness.

Page 2219