Page 2264 - Foton Workshop Manual - Aumark (BJ1099)
P. 2264

62-212                      DIAGNOSIS-HEATER & AIR CONDITIONING


           Diagnosis Procedure


           1.     Check the fuse


           (a).   Disconnect the battery negative cable.


                                                      (b).    Check the fuse in fuse box within engine
                                                              housing:
               Disconnect            Normal
                                                                  • F02(60A)
                                                       (c).   Check the fuse in fuse box within house:
                                                                  • F17(5A)
                                                                  • F33(5A)
                                                                  • F44(30A)

                                           fuwx62605

           Is the result normal?
           Yes>To step 2.
           No >Replace the fuse.


           2.     Check the start to cut off the relay


           (a).   Disconnect the battery negative cable.
           (b).   Unplug the start-up tripping relay R04.


                                                      (c).    Check the start-up tripping relay R04.
                                                                  Standard resistance:


                                                                Conditions      Connect by  Specified
                                                                                  multimeter       value
                                                                Ordinary state        1-2         Existed

                                                                  Apply the
                                                                battery voltage
                                                                 between the          3-4          < 2Ω
                                                                No. 1 and No. 2
                                                                     pin
           Is the result normal?
           Yes>To step 3.
           No >change start to cut off the relay, to validate whether the fault exists or not.


           3.     CHECK front blower relay


           (a).   Disconnect the battery negative cable.
           (b).   Remove front blower relay R03.





                                                                                                     Page 2264
   2259   2260   2261   2262   2263   2264   2265   2266   2267   2268   2269