Page 2269 - Foton Workshop Manual - Aumark (BJ1099)
P. 2269
DIAGNOSIS-HEATER & AIR CONDITIONING 62-217
(d). Measure the resistance according to values
in the table below.
Standard resistance: (check whether there
is an open circuit)
Connect the pin by Standard value 62
multimeter
C42(A17)—C39(2)
＜ 2 Ω
C42(B17)—C39(3)
Is the result normal?
Yes >change start to cut off the relay, to validate whether the fault exists or not.
No >Repair or replace the harness.
Page 2269
