Page 1882 - Foton Workshop Manual - Tunland (AT)

41-30 TRANSMISSION（6HP21） - OUTPUT SHAFT OIL SEAL (2WD)

4 . Refit the output shaft oil seal.
(a) Use the special tool to refit the output shaft
big oil seal.
NOTICE

The oil seal shall be installed with the lettered
surface facing up.

(b) Use the rubber hammer to fit the oil seal in

(c) Fit the flange plate onto the transmission, and
use the special tool to fit the guide part onto
the output shaft.

(d) Fit the output shaft small oil seal onto the
special tool.

NOTICE

The oil seal shall be installed with the lettered
surface facing up.

41

(e) Fit the output shaft small oil seal in place with
the special tool.

Page 1882