Page 1883 - Foton Workshop Manual - Tunland (AT)

TRANSMISSION（6HP21） - OUTPUT SHAFT OIL SEAL (2WD) 41-31

(f) Locate the transmission at “P” gear and
use the special tool to tighten the locking nut.
Torque:60 N•m

(g) Use a tool to hammer on the nut groove.

NOTICE

After the groove of locking nut is locked, visually
check the nut, and there shall be no crack.

(h) The distance from the groove depression after
the nut is locked shall not exceed 25.7mm.

41

5 . Refit the hydraulic torque converter (refer to “Chapter 41 Transmission (6HP21)-

Replacement, hydraulic torque converter”).
6 . Refit the transmission assembly (refer to “Chapter 41 Transmission (6HP21) -
Replacement, transmission assembly”).

Page 1883