Page 1896 - Foton Workshop Manual - Tunland (AT)

41-44 TRANSMISSION（6HP21） - TRANSFER CASE（4WD）

REPLACEMENT

1 . During disassembly, the gearbox shall be engaged in neutral position and the
transfer case in 2H position
2 . Turn off the ignition switch
3 . Remove the front transmission shaft the rear transmission shaft (Refer To
"Chapter 34 Axle & Transmission Shaft - Transmission Shaft, Replacement")

4 . Drain the transfer case oil.
(a) Screw out the drain bolt and drain the transfer
case oil.
NOTICE

Install the transfer case oil drainage plug after
the drainage of transfer case lubricating oil.

Torque:19~30N•m

5 . Remove other accessories of the transfer
case
(a) Disconnect the gear shift motor connector
(b) Disconnect electromagnetic clutch coil
connector.
(c) Loose the transfer case harness

6 . Remove the transfer case assembly.
41
(a) Screw off the transfer case vent hose fixing
bolt.

Page 1896